Error Code 27008system Cant Satisfy the Requested Bandwith Please Input Again

This Article Applies to:

TL-WR841N , TL-WDR3500 , TL-WR743ND , Archer C50( V1 ) , TL-WDR4900 , TL-MR3420 , TL-WR941ND , TL-WR843N , TL-WR710N , TL-WDR4300 , TL-WR702N , TL-WR700N , TL-WR841HP , TL-WR1043ND , TL-WR1042ND , TL-WDR3600 , TL-WR842N , Archer C20( V1 ) , TL-WR940N , Archer C7( V1 V2 V3 ) , Archer C20i , TL-WR741ND , TL-WR740N , TL-WR840N , TL-WR810N , TL-WR841ND , TL-WR720N , TL-WR843ND , TL-WR842ND , TL-MR3020 , Archer C5( V1.20 ) , Archer C2( V1 ) , TL-MR3220 , TL-MR3040

Why we need Bandwidth Control?

Within a normal home network, the bandwidth is shared by all computers. This means whatever computer using high-bandwidth applications, for example torrent programs or other P2P software, will affect the other computers. This may also include negative influence on the performance of the unabridged network. How tin we avoid this?

The answer isBandwidth Control, which is designed to minimize the impact acquired when the connexion is nether heavy load.  Using Bandwidth Control, we can assign a specific minimum or maximum bandwidth for each reckoner, which ways they have less interference on each other. Delight follow the steps below to configure this feature.

How to configure Bandwidth Control?

The scenario below volition take 3 computers sharing 512KbpsEgress Bandwidth and 4MbpsIngress Bandwidth equally an example, and explicate how to utilise Bandwidth Command to optimize the load respectively.

Scenario:

Example: ① PC1 frequently plays online game and downloads files which uses the nigh part of bandwidth.

② PC2 is used for watching movies on the Internet which also needs much bandwidth.

③ PC3 is used for browsing websites commonly, so it merely needs a few bandwidth.

Please log in to the web management interface to setup bandwidth command.

Step 1

Open the web browser and in the address bar type in the default admission like : :http://tplinkwifi.net

Note:

Please detect the default admission on the bottom label of the product.

Step 2

Type the username and countersign in the login page. The default username and password are bothadminin lower case.

Step iii

Click onBandwidth Control-Control Settings on the left bill of fare .

Note:

For example, if you take a ADSL Modem, please choose "ADSL" on the line type. If you lot don't know how to choose theLine Type, please contact your ISP which line type you take access.

TheEgress BandwidthandIngress Bandwidth should be the  real bandwidth  given past your ISP . ( 1Mbps=1024Kbps )

Pace 4

ClickSaveto save the Settings .

Step 5

ClickBandwidth Command -> Rules Liston the left folio, you can view and configure the rules .

Step 6

Click Add New to add together a new dominion.

IP Range- Single IP address or IP address Range. When you configure the unmarried IP address, the calculator with this IP address will get independent given bandwidth. When you configure the IP address range, all computers in the range volitionshare the given bandwidth.

Port Range- The port arrange of TCP protocol or UDP protocol.

Protocol- You tin cull the TCP protocol or UDP protocol or both of them.

Egress Bandwidth  - The max and the min upload speed which through the WAN port, default number is 0.

Ingress Bandwidth - The max and the min download speed through the WAN port, default number is 0.

NOTE:

You'd meliorate ready static IP Address on your local computers or configure Accost reservation on the wireless router in order to manage easily.

Almost how to configure TCP/IP backdrop on your computer, please refer to FAQ 14

About how to configure Address Reservation, please refer to FAQ 182

Footstep seven

According to the demand of clients, the bandwidth could be allocated equally following.

From the rules, the max Bandwidth can ensure that  PC1 and PC2 can have up all bandwidth when it's alone to access the Internet and the min Bandwidth can ensure that they have the necessary bandwidth when more than than i PC work at the same time.

Note: The amount ofMin Egress Bandwidth and Min Ingress Bandwidth you configure should be less than Egress Bandwidth andIngress Bandwidth you configure onBandwidth Control settings page previously.

Footstep viii

Enable the Bandwidth Control and click the Save push button onBandwidth Control Settings to take issue.

Go to know more details of each role and configuration delight become to Download Centerto download the manual of your production.

Is this faq useful?

Your feedback helps improve this site.

What's your business with this article?

• Dissatisfied with product
• Too Complicated
• Confusing Title
• Does not employ to me
• Too Vague
• Other

Nosotros'd love to get your feedback, please permit united states know how nosotros can improve this content.

Thank you

We appreciate your feedback.
Click here to contact TP-Link technical support.

lofgrensquing.blogspot.com

Source: https://www.tp-link.com/ae/support/faq/557/

Share this post